Al-Shathr, B.; Shamsa, M.; Al-Attar, T. (2018). Relationship between amorphous silica in source materials and compressive strength of geopolymer concrete. MATEC Web of Conferences, 162, 02019. https://doi.org/10.1051/matecconf/201816202019
ASTM C109/C109M - 16a. (2016). Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)1. https://doi.org/10.1520/C0109
ASTM C33/C33M-18. (2018). Standard Specification for Concrete Aggregates. https://doi.org/10.1520/C0033
ASTM D422-63. (2007). Standard test method for particle-size analysis of soils. https://doi.org/10.1520/D0422-63R07E02.2
Comisión Asesora Permanente Para el Regimen de Construcciones Sismo Resistentes. (2010). NSR-10. Reglamento Colombiano de Construcción Sismo Resistente NSR-10, Ministerio de Ambiente, Vivienda y Desarrollo Territorial.
Consoli, N. C.; Da Silva, A. P.; Nierwinski, H. P.; Sosnoski, J. (2018). Durability, strength, and stiffness of compacted gold tailings – cement mixes. Canadian Geotechnical Journal, 55(4), 486–494. https://doi.org/10.1139/cgj-2016-0391
De Rossi, A.; Simão, L.; Ribeiro, M. J.; Novais, R. M.; Labrincha, J. A.; Hotza, D.; Moreira, R. (2019). In-situ synthesis of zeolites by geopolymerization of biomass fly ash and metakaolin. Materials Letters, 236, 644–648. https://doi.org/10.1016/j.matlet.2018.11.016
Duan, P.; Yan, C.; Zhou, W.; Ren, D. (2016). Fresh properties, compressive strength and microstructure of fly ash geopolymer paste blended with iron ore tailing under thermal cycle. Construction and Building Materials, 118, 76–88. https://doi.org/10.1016/j.conbuildmat.2016.05.059
Gitari, M. W.; Akinyemi, S. A.; Thobakgale, R.; Ngoejana, P. C.; Ramugondo, L.; Matidza, M.; Mhlongo, S. E.; Dacosta, F. A.; Nemapate, N. (2018). Physicochemical and mineralogical characterization of Musina mine copper and New Union gold mine tailings: Implications for fabrication of beneficial geopolymeric construction materials. Journal of African Earth Sciences, 137, 218–228. https://doi.org/10.1016/j.jafrearsci.2017.10.016
Kinnunen, P.; Ismailov, A.; Solismaa, S.; Sreenivasan, H.; Räisänen, M. L.; Levänen, E.; Illikainen, M. (2018). Recycling mine tailings in chemically bonded ceramics – A review. Journal of Cleaner Production, 174, 634–649. https://doi.org/10.1016/j.jclepro.2017.10.280
Kiventerä, J.; Golek, L.; Yliniemi, J.; Ferreira, V.; Deja, J.; Illikainen, M. (2016). Utilization of sulphidic tailings from gold mine as a raw material in geopolymerization. International Journal of Mineral Processing, 149, 104–110. https://doi.org/10.1016/j.minpro.2016.02.012
Król, M.; Mozgawa, W. (2019). Zeolite layer on metakaolin-based support. Microporous and Mesoporous Materials, 282 (February), 109–113. https://doi.org/10.1016/j.micromeso.2019.03.028
Lahoti, M.; Wong, K. K.; Yang, E. H.; Tan, K. H. (2018). Effects of Si/Al molar ratio on strength endurance and volume stability of metakaolin geopolymers subject to elevated temperature. Ceramics International, 44(5), 5726–5734. https://doi.org/10.1016/j.ceramint.2017.12.226
Mermerdaş, K.; Manguri, S.; Nassani, D. E.; Oleiwi, S. M. (2017). Effect of aggregate properties on the mechanical and absorption characteristics of geopolymer mortar. Engineering Science and Technology an International Journal, 20(6), 1642–1652. https://doi.org/10.1016/j.jestch.2017.11.009
Nazari, A., y Sanjayan, J. G. (2017). Handbook of Low Carbon Concrete. Oxford, Butterworth-Heinemann. https://www.elsevier.com/books/handbook-of-low-carbon-concrete/nazari/978-0-12-804524-4
Pacheco-Torgal, F. (2014a). Eco-efficient construction and building materials research under the EU Framework Programme Horizon 2020. Construction and Building Materials, 51, 151–162. https://doi.org/10.1016/j.conbuildmat.2013.10.058
Pacheco-Torgal, F; Labrincha, J. A.; Leonelli, C.; Palomo; A.; Chindaprasirt, P. (2014b). Handbook of Alkali-Activated Cements, Mortars and Concretes. Cambridge, Woodhead Publishing. https://www.elsevier.com/books/handbook-of-alkali-activated-cements-mortars-and-concretes/pacheco-torgal/978-1-78242-276-1
Pacheco-Torgal, F.; Jalali, S.; Labrincha, J. A.; John, V. M. (2013). Eco-Efficient Concrete. Cambridge. Woodhead Publishing Limited. https://www.elsevier.com/books/eco-efficient-concrete/pacheco-torgal/978-0-85709-424-7.
Palomo, A., Krivenko, P., Kavalerova, E., y Maltseva, O. (2018). A review on alkaline activation: New analytical perspectives. Materiales de Construcción, 64 (315), 1–23.
Pandurangan, K.; Thennavan, M.; Muthadhi, A. (2018). Studies on effect of source of flyash on the bond strength of geopolymer concrete. Materials Today: Proceedings, 5(5), 12725–12733. https://doi.org/10.1016/j.matpr.2018.02.256
Provis, J. L. (2017). Alkali-activated materials. Cement and Concrete Research. 114 (2), 40–48. https://doi.org/10.1016/j.cemconres.2017.02.009
Provis, J. L.; Van Deventer, J. S. (2009). Geopolymers: Structures, processing, properties and industrial applications. Australia, Woodhead Publishing. https://www.elsevier.com/books/geopolymers/provis/978-1-84569-449-4.
Ramujee, K.; Potharaju, M. (2017). Mechanical Properties of Geopolymer Concrete Composites. Materials Today: Proceedings, 4 (2), 2937–2945. https://doi.org/10.1016/j.matpr.2017.02.175
Rend, M.; Fern, B. A.; Mart, M.; Andr, M.; José, T. A.; (2015). Desarrollo de nuevos cementos: “Cementos alcalinos y cementos híbridos”, México, Instituto Mexicano del Transporte, 73 p.
Rivera, G. (2013). Dosificación de mezclas de concreto. Concreto simple. Colombia, pp. 169-197. Universidad del Cauca. https://www.academia.edu/13569512/CONCRETO_SIMPLE
Solismaa, S.; Ismailov, A.; Karhu, M.; Sreenivasan, H.; Lehtonen, M.; Kinnunen, P.; Illikainen, M.;
Räisänen, M. L. (2018). Valorization of Finnish mining tailings for use in the ceramics industry. Bulletin of the Geological Society of Finland, 90 (1), 33–54. https://doi.org/10.17741/bgsf/90.1.002
Spin S.A. (2018). Especificaciones y certificado de calidad Flocsil, Colombia, Centro de investigación Spin S.A, 1 p.
Wei, B., Zhang, Y., y Bao, S. (2017). Preparation of geopolymers from vanadium tailings by mechanical activation. Construction and Building Materials, 145, 236–242. https://doi.org/10.1016/j.conbuildmat.2017.03.234
Wills, B. A.; Finch, J. A. (2016). Wills’ Mineral Processing Technology. Oxford, Butterworth-Heinemann. https://www.elsevier.com/books/wills-mineral-processing-technology/wills/978-0-08-097053-0
